Search results

Engineering design optimization involving computational simulations is usually a time-consuming, even computationally prohibitive process. To relieve the computational burden, the adaptive metamodel-based design optimization (AMBDO) approaches have been widely used. This paper aims to develop an AMBDO approach, a lower confidence bounding approach based on the coefficient of variation (CV-LCB) approach, to balance the exploration and exploitation objectively for obtaining a global optimum under limited computational budget.

In the proposed CV-LCB approach, the coefficient of variation (CV) of predicted values is introduced to indicate the degree of dispersion of objective function values, while the CV of predicting errors is introduced to represent the accuracy of the established metamodel. Then, a weighted formula, which takes the degree of dispersion and the prediction accuracy into consideration, is defined based on the already-acquired CV information to adaptively update the metamodel during the optimization process.

Ten numerical examples with different degrees of complexity and an AIAA aerodynamic design optimization problem are used to demonstrate the effectiveness of the proposed CV-LCB approach. The comparisons between the proposed approach and four existing approaches regarding the computational efficiency and robustness are made. Results illustrate the merits of the proposed CV-LCB approach in computational efficiency and robustness.

The proposed approach exhibits high efficiency and robustness in engineering design optimization involving computational simulations.

CV-LCB approach can balance the exploration and exploitation objectively.

This paper aims to focus on the accurate analysis of the fractional heat transfer in a two-dimensional (2D) rectangular monolayer tissue with three different kinds of lateral boundary conditions and the quantitative evaluation of the degree of thermal damage and burn depth.

A symplectic method is used to analytically solve the fractional heat transfer dual equation in the frequency domain (s-domain). Explicit expressions of the dual vector can be constructed by superposing the symplectic eigensolutions. The solution procedure is rigorously rational without any trial functions. And the accurate predictions of temperature and heat flux in the time domain (t-domain) are derived through numerical inverse Laplace transform.

Comparison study shows that the maximum relative error is less than 0.16%, which verifies the accuracy and effectiveness of the proposed method. The results indicate that the model and heat source parameters have a significant effect on temperature and thermal damage. The pulse duration (Δt) of the laser heat source can effectively control the time to reach the peak temperature and the peak slope of the thermal damage curve. The burn depth is closely correlated with exposure temperature and duration. And there exists the delayed effect of fractional order on burn depth.

A symplectic approach is presented for the thermal analysis of 2D fractional heat transfer. A unified time-fractional heat transfer model is proposed to describe the anomalous thermal behavior of biological tissue. New findings might provide guidance for temperature prediction and thermal damage assessment of biological tissues during hyperthermia.

With the improvement of modern aircraft requirements for safety, long life and economy, higher quality aircraft assembly is needed. However, due to the manufacturing and assembly errors of the posture adjustment mechanism (PAM) used in the digital assembly of aircraft large component (ALC), the posture alignment accuracy of ALC is difficult to be guaranteed, and the posture adjustment stress is easy to be generated. Aiming at these problems, this paper aims to propose a calibration method of redundant actuated parallel mechanism (RAPM) for posture adjustment.

First, the kinematics model of the PAM is established, and the influence of the coupling relationship between the axes of the numerical control locators (NCL) is analyzed. Second, the calibration method based on force closed-loop feedback is used to calibrate each branch chain (BC) of the PAM, and the solution of kinematic parameters is optimized by Random Sample Consensus (RANSAC). Third, the uncertainty of kinematic calibration is analyzed by Monte Carlo method. Finally, a simulated posture adjustment system was built to calibrate the kinematics parameters of PAM, and the posture adjustment experiment was carried out according to the calibration results.

The experiment results show that the proposed calibration method can significantly improve the posture adjustment accuracy and greatly reduce the posture adjustment stress.

In this paper, a calibration method based on force feedback is proposed to avoid the deformation of NCL and bracket caused by redundant driving during the calibration process, and RANSAC method is used to reduce the influence of large random error on the calibration accuracy.

Since the beginning of the 21st century, China’s outward foreign direct investment (OFDI) is growing steadily and Chinese multinationals (MNCs) are playing an increasingly important role in the global economy. Thus, the number of papers focusing on China’s OFDI and Chinese MNCs has been increasing during the last years. The aim of this chapter is to carry out a review of the empirical papers dealing with Chinese MNCs published between 2002 and 2012 in high-impact international business and management journals.

This chapter reviews 43 empirical papers focusing on Chinese MNCs that were published in nine major scholarly journals between 2002 and 2012.

We report individual and institutional contributions, the theories and methods used, the research topics, and the main findings. We also discuss implications for future research.

Some previous literature reviews have dealt with research on China’s OFDI and Chinese MNCs. Nevertheless, none of the earlier reviews dealt specifically with empirical papers; neither did they provide an analysis of both individual and institutional contributions.

The purpose of this paper is to analyze the dependent competing failure reliability of harmonic drive (HD) with strength failure and degradation failure.

Based on life tests and stiffness degradation experiments, Wiener process is used to establish the accelerated performance degradation model of HD. Model parameter distribution is estimated by Bayesian inference and Markov Chain Monte Carlo (MCMC) and stiffness degradation failure samples are obtained by a three-step sampling method. Combined with strength failure samples of HD, copula function is used to describe the dependence between strength failure and stiffness degradation failure.

Strength failure occurred earlier than degradation failure under high level accelerated condition; degradation failure occurred earlier than strength failure under medium- or low-level accelerated condition. Gumbel copula is the optimum copula function for dependence modeling of strength failure and stiffness degradation failure. Dependent competing failure reliability of HD is larger than independent competing failure reliability.

The reliability evaluation method of dependent competing failure of HD with strength failure and degradation failure is first proposed. Performance degradation experiments during accelerated life test (ALT), step-down ALT and life test under rated condition are conducted for Wiener process based step-down accelerated performance degradation modeling.

This study aims to propose an improved affine interval truncation algorithm to restrain interval extension for interval function.

To reduce the occurrence times of related variables in interval function, the processing method of interval operation sequence is proposed.

The interval variable is evenly divided into several subintervals based on correlation analysis of interval variables. The interval function value is modified by the interval truncation method to restrain larger estimation of interval operation results.

Through several uncertain displacement response engineering examples, the effectiveness and applicability of the proposed algorithm are verified by comparing with interval method and optimization algorithm.

This study aims to investigate the two-dimensional magnetohydrodynamic flow and heat transfer of a fractional Maxwell nanofluid between inclined cylinders with variable thickness. Considering the cylindrical coordinate system, the constitutive relation of the fractional viscoelastic fluid and the fractional dual-phase-lag (DPL) heat conduction model, the boundary layer governing equations are first formulated and derived.

The newly developed finite difference scheme combined with the L1 algorithm is used to numerically solve nonlinear fractional differential equations. Furthermore, the effectiveness of the algorithm is verified by a numerical example.

Based on numerical analysis, the effects of parameters on velocity and temperature are revealed. Specifically, the velocity decreases with the increase of the fractional derivative parameter α owing to memory characteristics. The temperature increase with the increase of fractional derivative parameter ß due to a decrease in thermal resistance. From a physical perspective, the phase lag of the heat flux vector and temperature gradients τ_q and τ_T exhibit opposite trends to the temperature. The ratio τ_T/τ_q plays an important role in controlling different heat conduction behaviors. Increasing the inclination angle θ, the types and volume fractions of nanoparticles Φ can increase velocity and temperature, respectively.

Fractional Maxwell nanofluid flows from a fixed-thickness pipe to an inclined variable-thickness pipe, and the fractional DPL heat conduction model based on materials is considered, which provides a basis for the safe and efficient transportation of high-viscosity and condensable fluids in industrial production.

The purpose of this study is to investigate the unsteady stagnation-point flow and heat transfer of fractional Maxwell fluid towards a time power-law-dependent stretching plate. Based on the characteristics of pressure in the boundary layer, the momentum equation with the fractional Maxwell model is firstly formulated to analyze unsteady stagnation-point flow. Furthermore, generalized Fourier’s law is considered in the energy equation and boundary condition of convective heat transfer.

The nonlinear fractional differential equations are solved by the newly developed finite difference scheme combined with L1-algorithm, whose convergence is verified by constructing a numerical example.

Some interesting results can be revealed. The larger fractional derivative parameter of velocity promotes the flow, while the smaller fractional derivative parameter of temperature accelerates the heat transfer. The temperature boundary layer is thicker than the velocity boundary layer, and the velocity enlarges as the stagnation parameter raises. This is because when Prandtl number < 1, the capacity of heat diffusion is greater than that of momentum diffusion. It is to be observed that all the temperature profiles first enhance a little and then reduce rapidly, which indicates the thermal retardation of Maxwell fluid.

The unsteady stagnation-point flow model of Maxwell fluid is extended from integral derivative to fractional derivative, which has more flexibility to describe viscoelastic fluid’s complex dynamic process and provide a theoretical basis for industrial processing.

Since China initiated its “go global” policy that promotes its overseas investment, China’s Outward Foreign Direct Investment (OFDI) has increased almost twenty times during the last 10 years, reaching $55.9 billion in 2008. The issue of internationalization of Chinese OFDI has attracted increasing attention of researchers from a business perspective. This article systematically reviews the previous studies on overseas investments by Chinese MNEs and discusses the characteristics of Chinese internationalization behavior at both firm level and country level. The internationalization of Chinese companies cannot be understood as a simple game of “catch up” with established MNEs, and more firm‐level empirical studies should be carried out on how these characteristics influence firms’ strategic decisions.